Water for All
To set up the Point ZeroTwo Bucket Purification System, first find a large container to fill with water (such as a standard 5-gallon polyethylene bucket, not included). Use the included drill bit to cut a hole 1.5 inches from the bottom of the container. Install the adapters onto the bucket, connect the hose, and snap it into the Point ZeroTwo filter. Then hang the filter onto the side of the bucket with the included hanger.
Fill the bucket with lake, stream, river, well, borehole, tap, or rain water. To start water flowing, simply lower the filter down below the opening on the bucket and let gravity do the work. You’ll be able to filter up to 170 gallons of fresh, clean water per day. To stop filtering, just hang the Point ZeroTwo from the top of the bucket.
0.02 Micron Absolute Filtration
Our water filters contain a high number of tiny ‘U’ shaped hollow fiber micro-tubes that trap contaminants while allowing decontaminated water to freely pass through at a high flow rate — eliminating the need to store water and reducing the possibility of water contamination after the filtration process.
Certified for 0.02 micron absolute filtration, the Point ZeroTwo Purifier has no pore size larger than 0.02 micron in size — enabling it to remove 99.997% of viruses (exceeding EPA and NSF recommendations). It also effectively removes harmful bacteria (like salmonella), protozoa, or cysts like E. coli, Giardia, Vibrio cholerae, and Salmonella typhi.
A Lifetime Of Clean Water
The Point ZeroTwo Purifier’s filtering membranes are sturdy enough to withstand backwashing using the included syringe, restoring up to 98.5% of the filter’s flow rate.
The Point ZeroTwo system can be cleaned and reused almost indefinitely with no expensive cartridges to replace… ever. We recommend backwashing and sanitizing the filter after every outing for optimized use.
Fully field maintainable, the Gravity Purification System includes a faucet adapter for a more thorough backwash when you get back home.